How do security inspection machine manufacturers operate security inspection x-ray machines correctly?

2019-10-08 11:57:08 Announcer：Shenzhen Fangji Infinite Technology Co., Ltd.

629

X-ray security inspection machine is a widely used equipment at present, but it needs to be well maintained during use because it can increase its service life. In normal use, we must do a good job of preventing moisture from entering the device body and causing system failure. Security machine manufacturers to share the correct operation method of x-ray security machine.

Before powering on the system, the lead screen at the entrance and exit of the channel must be checked to prevent X-ray leakage. If there is damage, it needs to be replaced immediately. Check whether the conveyor belt is intact and whether there are thorns or stains that endanger the checked baggage. The LCD screen of the machine is forbidden to touch or impact with sharp hard objects. Check for signs that the lock on the console has been damaged by an unauthorized person.

Check if all the enclosures of the machine are covered and whether the power socket of the equipment is reliably grounded. Any equipment that produces X-rays is harmful and must be taken seriously. When the X-ray lamp is on, no part of the body can enter the inspection room. The commissioning and maintenance of any security X-ray machine must be operated by professional and technical personnel. It is not allowed to modify or add any accessories without permission, otherwise no guarantee will be provided. Do not stand or sit on the conveyor belt while the conveyor belt is running. Do not touch the edges and both ends of the conveyor belt with your hands. When the conveyor belt does not walk or stops while walking, you should immediately check whether the roller and conveyor belt are slipping or stuck, otherwise the electric roller will be burned.

Please use the voltage marked on this machine. To prevent leakage, please connect a leakage protector before connecting to the power supply. It is forbidden to place cups and food on the operating table and machine. Liquid seeping into the machine can cause a short circuit. When the ambient temperature of the X-ray security inspection machine is below 5 degrees Celsius, it should be turned on and preheated 30 minutes in advance, and the water stains and ice should be removed before the luggage passes through. When the security inspection machine is not used for a long time, it should be moved to a dry and ventilated place.

new NewsHot News

1How to choose X-ray security inspection machine manufacturer and safe application counseling?2020-02-11

<What are the precautions for assembly and handling of metal security doors?

>What are the differences between X-ray foreign object detector and metal detector?

How do security inspection machine manufacturers operate security inspection x-ray machines correctly?

Product

Solution

Support

News

About's

Contact Details