To prevent collision, the security gate should be equipped with luggage or bags packed with soft sponges. There should be space for storing device manuals and some common hardware tools. This point is mentioned because durable outer packaging is generally not available for sale, so this amount must be taken into account when purchasing security gates. For safety doors, the outer packaging materials must be wear-resistant and aging; the zipper, bones and belts, the handles should be firm, choose a reasonable location, the lighter the outer packaging, the better it is not to use metal materials to assemble the safety inspection door design Packaging is the main method. If the door is heavier, single-board independent packaging is suitable. If it is lighter, complete packaging can be used.

　　In order to facilitate loading and unloading and storage, a stable structure and detachable assembly safety door must be purchased. Care must be taken during assembly to avoid blind and quick assembly. Pins, bolts, holes and slots in the connecting part should be aligned to avoid unnecessary wear When fixing the side with screws, the force should be moderate, too tight will cause buckle, too loose may be caused by lifting the connection part crack.

When installing the X-ray security door, you must accumulate experience first and then what you want to connect. If you need to connect the wires first to assemble, after connecting the wires, prevent the wires from being dragged due to the separation of the door panel and chassis. To break the pin-hole interface of the two plugs, it should be corrected, the force should be light, it should be inserted into the connection, and the wire can not be pulled. When tightening the screw port of the joint, the twisted part should be correct, otherwise the joint will loosen or disconnect the joint.