In daily life, such as during security inspections, we sometimes encounter X-ray security inspection machines. The electrical system is an important part of it. The existence of the power system provides a solid power supply for X-ray machines, even in relatively special emergencies. In order to better operate the X-ray machine, the operator should better understand the use of methods and maintenance methods.
X-ray security inspection machine adopts solid fuse, which can meet the maximum power requirement of the equipment. There is a circuit breaker on the back of the fuse, and the short-circuit at the rear end can instantly trip to play an effective protection role. The internal short circuit of the device is mainly due to the aging of the insulation layer and the loose connection of the terminal, which causes the short circuit of the power supply and human factors.
X-ray security inspection machine's tightening stop button is placed near the operator and the equipment shell. Once an emergency occurs, the power can be cut off immediately. The equipment needs trained full-time staff to operate, non-workers can not use it at will, so the use of the equipment has the right to control. One is in the electrical system and the other is in the software, controlled by the key switch.
It is connected in series with the main control circuit. Only when you get the key can you turn on the device to prevent others from triggering the device by mistake. Adopt remote control to start the control mode, and place the control buttons on the operating table separate from the main equipment. The console can be placed in a room or place that needs to be extended and controlled by a power extension cable to achieve remote operation of the device.