At present, many places are equipped with X-ray security machines, security doors and other security equipment, so what are the normal operating specifications of security machines? The following Fangji unlimited security machine manufacturers and technical staff share with you:

Operation specification for correct shutdown of security inspection machine:
1. Press the "Stop" button on the security inspection machine keyboard to stop the belt rotation and stop the baggage inspection;

2. Press the "Exit" key on the keyboard of the security machine, and the system will prompt "Shutdown"

3. The security inspection machine presses the "OK" key on the keyboard to confirm the shutdown of the computer;

4. Turn the "key switch" key counterclockwise to the off position and turn off the power of the device;

5. Unplug the main power socket and turn off the device completely.

Operation specification for correct startup of security inspection machine:

1. Insert the main power plug of the security inspection machine into the power outlet;

2. Check whether the red "emergency stop" button of the security machine is in the rotating position. If it is not in the rotating position, the red emergency stop button points clockwise to the reset position;

3. Insert the "key switch" key of the security inspection machine, and turn it clockwise to the starting position;

4. Press the green "power" button of the security machine to turn on the power of the device;

5. Press the "forward" button on the keyboard of the security inspection machine, rotate the belt forward to start the baggage inspection.

Note: If the IPC cannot start automatically after being turned on, please open the door on the right side of the operating table and press the "Power" button of the computer.

The above is the content shared by the security inspection machine manufacturers. If you encounter problems during the specific operation, you can call the X-ray security inspection machine manufacturers.