We all know that security gates are used to check people, and security machines are used to check items. So what is the operation process of the channel security inspection machine? Today, Fang Ji unlimited want to briefly introduce x-ray security inspection equipment to you:

　　1. Insert the power supply, turn on the key switch clockwise, and then press the start button (green button). At this time, the green power lights at both ends of the machine light up, the whole machine starts, and the computer starts automatically. Wait patiently for the computer to fully boot up. Use the mouse to click on the software icon to open the safe machine application. The safe machine enters the application interface. The machine starts self-checking, the conveyor belt runs, and the "Roller Indication" and "Data Transfer" buttons are green.

  2, it is very important to clear the debris in the conveyor belt channel of the X-ray security inspection machine; check the red emergency stop button at the entrance of the channel and the operating table should rotate clockwise and pop up, otherwise the device cannot be turned on; check whether the machine is placed smoothly, Whether the power outlet is connected to the ground wire.

  3. Wait for the machine to automatically check and stop, click the user button with the mouse, or press the corresponding key on the keyboard to enter the user login interface, enter the user name with a numeric keyboard in the login number box, enter the password in the login password box, and then Click the mouse to start using the machine.

  4. After waiting patiently, the machine's green indicator light will automatically turn off and the machine will be cut off. Unplug the device after power failure, and move the machine to a dry and ventilated place for storage.

  5. When there is no baggage in the passage, you can use the mouse to click or press the keyboard (backward) key, the conveyor belt reverses the operation, after the baggage is exported, click or press the keyboard "stop" button, the conveyor belt stops running, when When the luggage is withdrawn, do not reverse it for a long time, otherwise the conveyor belt will run away.

  6. Click the mouse or press the keyboard (forward) button, the conveyor belt runs forward, the shipper puts the luggage on the conveyor belt to start the inspection; when there is no luggage for a long time, use the mouse to click or press the keyboard "stop" button, the conveyor belt Stop running, the machine enters the standby state.

 7. After exiting to the computer startup screen, click "Start-Shutdown Computer-Shutdown", the computer will automatically shut down. At this time, you can turn the "Key Switch" counterclockwise to close the position and remove the power-on key.

 8. Press the exit key when closing the keyboard, and then pop up the "shut down the computer" and "return to program" buttons. Use the mouse to click "shut down the computer" to exit the security machine application, click "return to the program" will not exit.

 The above is the introduction of the operation steps of the channel X-ray security inspection machine.






Note: The installation environment of the channel X-ray security inspection machine should be dry and ventilated. If the environment is humid, waterproof measures should be taken to extend the service life of the machine.