At present, security inspection machines have been widely used in various industries. If you want to use it for a period of time, and do the maintenance work of the security inspection equipment, the failure of the machine will not cause major problems. So how to maintain the security machine at the station? The main points are as follows:
1. Persistently dry exercise environment is not wet: Why insist on the dryness of the environment. Professionals know that electronic products are affected by moisture, and short circuits are prone to occur after being wet, but citizens generally lack protection work. The security inspection machine is the raw material of all electronic products and circuit boards, among which the main components are organic electricity, electronics and optics. If the circuit parameters change or the mechanical components do not work due to the influence of the humid environment, the electrical components will short-circuit after the mildew occurs and burn the machine parts, or the electric shock will be formed due to the decrease in insulation strength. Therefore, the requirements of the security inspection machine on the environment are very important. Moisture-proof measures must be taken, and the equipment must be kept in a dry environment not to let the equipment get wet and moldy. Only in this way can the normal operation of the machine be ensured and the service life of the machine be extended. Moisture resistance is one of the safety measures and must be highly regarded.
2. Check the condition of the security inspection machine at any time: During the use process, due to the service life of the equipment and some objective reasons, there will always be some unsafe factors that need to be checked at any time to prevent the occurrence of major accidents. Usually check whether the focus is on the bottom line, whether the X-ray tube sleeve is leaking, whether the temperature rise of the tube head is too high, whether the machine is operating normally, whether the wire rope is broken, whether the console knob is misplaced, etc. Once an abnormal phenomenon is found, the power of the machine should be blocked, corrected or replaced immediately.
3. The internal cleaning of the equipment: not only moisture-proof, but also dust-proof. If the dust intrudes into the machine, it will also cause a short circuit of the safety inspection machine. Don't underestimate the result of dust, dust will cause poor contact of some electrical components, and will also form a short circuit, affecting the normal operation of the machine, or even burn out the machine. When cleaning external dust, it is best to use a vacuum cleaner; the dust in the machine, the best hair dryer and fine brush to clean, do not wipe with a damp cloth. Some parts can be covered with cloth cover to achieve a good dustproof effect.
4. External cleaning of the equipment: Since the X-ray security inspection equipment is used to detect passenger luggage, when the machine is placed in a public place, dust will inevitably be generated for a long time, and the towel will be wringed out during the cleaning process, otherwise Towel water will flow into the security machine, allowing the machine to produce moisture, affecting the normal operation and service life of the machine.
Security series
Q Q
Skype
13632941820