As for the security check machine, I believe everyone has seen it. We need to conduct daily security checks on subways and train stations. So how do security inspectors maintain and maintain the security inspection machine? The following is what Fang Ji Infinite has shared about the maintenance skills of the security inspection machine.

Maintenance skills of security inspection machine:

1. Check the emergency stop button above the security inspection machine channel: press the emergency stop button, the security check function will be turned off immediately. If the button is not reset, the device cannot start again.

2. Check the travel switch on the detection box and collimator: remove any cover plate, the radiation will stop emitting.

3. Check whether the touch screen corresponds to the screen image: press the zoom key to zoom the image; press the image processing key, the displayed image can be converted accordingly.

4. Check the light barrier at the entrance: Place the opaque object on the running conveyor belt so that the radiation can be turned on normally. After the safety inspection machine is powered off, wipe the lens of the light barrier and the glass installed on the channel wall with dry silk.

5. Check the electric roller: press the corresponding key, the electric roller can run and stop in a predetermined direction. The drum noise is normal and there is no oil leakage.

6. Check the power indicator light above the security inspection machine: when the security inspection machine is powered on, the green indicator light should be on; check the x-ray indicator above the security inspection machine: when radiation is emitted, the red indicator light will be on.

7. Check the key switch above the channel: Only after the key switch is turned on, the start button can start the device. The light stop button can disconnect the light controller power. If the key switch becomes insensitive, replace it.

8. Check the deviation of the conveyor belt: check whether the conveyor belt deviates from the motor, check whether the heat dissipation opening is shielded and remove the dust on it.

The above 8 points are about the maintenance of Shenzhen security inspection machine. Only when the security inspection machine is regularly maintained and maintained during operation, the service life of the security inspection machine will be longer and the detection will be more accurate.