13632941820

CN

13632941820

Common problem

Security inspection machine installation steps

2019-07-16 14:10:21 Announcer:Shenzhen Fangji Infinite Technology Co., Ltd.
497
1-1: Installation process without console
1. Unpacking and attaching the shelves: before installation, remove the packaging, remove the receiving shelves and install the docking station exit (Note: the exit is marked with an "alarm light")


2. Connect the monitor, mouse and keyboard: insert the keyboard and mouse into the USB extension cable interface, power cord and VGA cable into the display interface

3. Connect to the main power supply: Insert the main power plug of the device into the jack (the following figure is based on the Chinese standard as an example) (Note: The device uses 220V power supply, and the socket needs a ground wire)

4. Check the emergency stop button: check whether the emergency stop button is pressed. When pressed, it needs to rotate clockwise to pop up (Note: yellow with "INPUT BAGGAGE" indicates the import direction)


5. The device is turned on: there is a start button above the top cover of the device. After pressing, the green power light is on and the display shows: "Starting windows"

6. System interface: The status indicator (collection indicator, connection indicator) lights up, click "Calibrate background color" in the lower right corner, the interface prompts "Calibrating"

7. Item detection: Click "Start Scrolling", the roller rotates, and the image of the item will be displayed on the interface after placing the item

8. Device shutdown: Long press the metal button above the top cover of the device for 3 seconds. After releasing, the system prompts "windows will be shut down within one minute" (Note: the operator can also prompt "OK to shut down" by clicking the red button on the software interface, After clicking "Confirm", the system will automatically shut down)



1-2: Installation process with console

1. Unpack and install the foot cups: Remove the outer packaging of the device, and align the two foot cups with the screw holes of the transfer table.


2. Horizontal delivery platform: After slowly and parallelly lowering the two sides of the delivery platform, remove the in-channel shelf and adjust the height of the foot cups (note: 2 foot cups on each side) until the delivery platform is perpendicular to the ground;

3. Connect to the console: insert the aviation head to the console and tighten

4. Connect to the main power supply: Insert the main power plug of the device into the jack, (The picture below shows the Chinese standard) (Note: The device uses 220V power supply, and the socket needs a ground wire)

5. Check the emergency stop button: check whether the three emergency stop buttons are pressed, if it is pressed, it needs to be rotated clockwise to pop up before the device can be started;

6. Turn on the device: When the device starts, insert the key, turn clockwise to "ON", then press the green start button "START", the green power light is on

7. System interface: The status indicators (acquisition indicator, connection indicator) in the lower left corner of the screen light up, click the "calibrate background" button at the lower right, and the interface prompts "calibrating".

8. Item detection: Click "Start Scrolling", the roller rotates, and the image display effect of the item will be displayed on the interface after placing the item;

9. Device shutdown: When the device is shut down, turn the key counterclockwise, the system interface prompts "windows will be shut down within one minute";

10. Mounting on the shelf: the foot cup is screwed into the screw hole of the shelf, and the shelf is connected to the exit of the transfer table. There is no "alarm light" at the exit, and the "square buckle" is buckled on both sides of the exit of the transfer table





Share:
new NewsHot News
<None Security machine software introduction>Security machine software introduction