13632941820

CN

13632941820

Common problem

Security inspection machine operation and maintenance

2019-07-16 14:10:05 Announcer:Shenzhen Fangji Infinite Technology Co., Ltd.
475
Security machine operation
1. Remove debris from the conveyor belt of X-ray machine.
2. Check the entrance of the passage and the red emergency stop button on the operation platform should rotate clockwise and pop up, otherwise the equipment cannot be powered on.
3. Check whether the machine is placed stably and whether the power socket is connected to the ground wire.
4. Plug in the power supply, turn the key switch clockwise to the open position, and then press the start button (green button). At this time, the green power lights on both ends of the machine light up, the whole machine is powered on and the application is automatically started.
5. After patiently waiting for the program to start completely, click on the "Calibrate Background" icon, and the "Connect" and "Acquisition" buttons will be green.
6. Wait for the word "calibration background color" to disappear.
7. Use the mouse to click "start scrolling" or press the "A" key on the keyboard. The conveyor belt runs in the forward direction, and the inspected person places the luggage on the conveyor belt to start the inspection.
8. When there is no baggage passing for a long time, use the mouse to click "stop scrolling" or press the "S" key, the conveyor belt stops running, and the machine enters the standby state.
9. When there is no baggage in the aisle, you can use the mouse to click "start scrolling" or press the "A" key on the keyboard, the conveyor belt runs. After the baggage exits, click "stop scrolling" with the mouse or press the keyboard "S" key, the conveyor belt stops running.
10. Turn the "key switch" counterclockwise to the off position and remove the power key.
11. After waiting patiently for 30 seconds, the green indicator light of the machine will automatically turn off and the machine will be powered off.
12. Unplug the device after power off, and move the machine to a dry and ventilated place for storage.

Maintenance of security machine
1. In order to achieve better use effect, the installation environment of X-ray security inspection machine should be dry and ventilated. If the environment is damp, waterproof measures should be taken to extend the service life of the machine.
2. Before use, check whether the shell panel, display, keyboard and cable of the device are damaged, whether the machine is placed smoothly, and then check whether the roller runs smoothly.
3. Before the system is powered on, the lead curtains used to prevent X-ray leakage at the entrance and exit of the channel must be checked. If they are damaged, they must be replaced immediately.
4. Check whether the conveyor belt is intact and whether there are spikes and smudges that harm the checked luggage. The machine's LCD screen is forbidden to be rubbed or hit by sharp hard objects
5. Check whether the lock on the operation platform is damaged by unauthorized persons.
6. Check that all the casings of the machine are covered, and check whether the power socket of the equipment is reliably grounded.
7. Any equipment that produces X-rays is harmful and must be taken seriously. When the X-ray lamp is lit, no part of the body can enter the inspection room
8. Any debugging and maintenance of the machine must be operated by professional and technical personnel, without permission without permission to modify or add any accessories, otherwise no warranty will be granted.
9. Do not stand or sit on the conveyor belt while the conveyor belt is running. Do not touch the edges of the conveyor belt and the rollers at both ends with your hands. When the conveyor belt does not go or stops at all times, you should immediately check whether the roller and conveyor belt are slipping or stuck, otherwise it will burn the electric roller.
10. Please use the marked voltage of the machine. To prevent leakage, please connect the leakage protector before connecting to the power supply.
11. It is forbidden to place water cups and food on the operation platform and the machine. Liquid seeping into the machine will cause a short circuit.
12. When the ambient temperature of the machine is lower than 5 degrees Celsius, it should be turned on and preheated 30 minutes in advance. The luggage should be cleared of water stains and ice cubes before passing through.
13. When the machine is not used for a long time, it should be moved to a dry and ventilated place for storage.


Share:
new NewsHot News
<Security machine software introductionSecurity machine software introduction Introduction of main accessories of security inspection machine>Introduction of main accessories of security inspection machine